27.25 X 19 RMP™ - CASE [Rigid MOLLE Panel] by Grey Man Tactical
ORDERS SHIP WITHIN 24 HOURS | FREE U.S. SHIPPING ON ORDERS $250+
SOLD OUT

RMP SERIES™

The RMP Series [Rigid MOLLE Panel]™ provides a vertical organizational platform for quick and easy access in conquering your gear. With universal MOLLE compatibility, your RMP™ can be quickly redesigned to enable optimal customization for any task. Made in America, each RMP™ is hand-finished and assembled with a focus on quality craftsmanship and high endurance materials.

GMT GUARANTEE™
We will repair or replace any defective GMT™ product at no cost to you. Does not apply to third party products.

FAST SHIPPING
All products are in stock and ship next business day unless otherwise noted in product description.

EASY RETURNS
If product is not what you need, return within 30 days for a refund of purchase price. Shipping costs not refundable.

COMPATIBILITY

VERIFIED CASE FIT
  • Pelican 1660 Protector case lid
  • Trunk lids of all size vehicles (measure to confirm height and width)
  • Rear under seats of a full size vehicle (measure to confirm height and width)
  • Rear seat back (inside trunk space) of a full fize vehicle
  • Any utility case with interior dimensions equal to or greater than 27.75" wide X 19" tall
  • Any safe door with interior dimensions equal to or greater than 27.75" wide X 19" tall

SPECIFICATIONS

WIDTH 27.25" | 692.15mm

HEIGHT 19" | 482.60mm

THICKNESS 0.188" | 4.77mm

WEIGHT 30 ounces | 850.49 grams

MATERIAL High Density Polyethylene

BRAND Grey Man Tactical™

SKU Pelican Case Screws: GMT-RMP-32-03-04
QTY 1 - 3M™ Dual Lock™ Fastener Kit: GMT-RMP-32-03-02

UPC Pelican Case Screws: 00850012379423
QTY 1 - 3M™ Dual Lock™ Fastener Kit: 00850012379430

RMP™ ADVANTAGE

MOLLE PANEL FEATURES RIGID CLOTH
MOLD + MILDEW RESISTANT
FIRE RESISTANT
RUGGED DURABILITY
LOAD-BEARING
SAG RESISTANT
HARD MOUNTING ABILITY
PERIMETER HOLES FOR HARD + SOFT FASTENING
PERIMETER SLOTS FOR CUSTOMIZING STRAP FASTENING
AMERICAN MADE CRAFTSMANSHIP

RMP™ FEATURES

Patented RMP [Rigid MOLLE Panel]™ grid design

Organizational platform for critical gear

Consistent positioning of critical gear enables quick access

Universal MOLLE compatibility

Weather resistant, non-corrosive build

Load-bearing, sag resistant construction

Durable high performance Polymer build
RMP Backer Plates Series™ enables seamless hard mounting of gear

40+ RMP™ models engineered to equip your vehicle, backpack, case + safe

Standardized sizing fits all applications

RMP™ can be quickly reorganized or interchanged for next task

1" slots for RMP Carry & Pull Handle™ and fastening

0.25" perimeter holes for paracord and screw fastening

Hand-finished, American made craftsmanship

GEAR MOUNTING

RUBBER CLAMPS

  • Purchase a Rubber Clamp with RMP Backer Plates™.
  • Place the included RMP Backer Plates™ in the preferred location behind the RMP™.
  • From the frontside of the RMP™, insert the screws through the Rubber Clamp and fasten into the RMP Backer Plates™.

HOLSTER INTEGRATION

  • Purchase a Holster Integration Kit.
  • Place the included RMP Backer Plates™ in the preferred location behind the RMP™.
  • From the frontside of the RMP™, insert the screws through the female adaptor and fasten into the RMP Backer Plates™.
  • Insert the screws through the male adaptor and fasten onto the holster.

  • PRO TIP
    Mount additional female adaptors onto a secondary Vehicle RMP™, Case RMP™, Plate Carrier or Belt Loop for easy transfer of one holster to multiple locations.

MOLLE STRAPS

For mounting gear with integral straps onto an RMP™, weave straps through the RMP™ grid.
For mounting gear without integral straps or gear with tight MOLLE webbing to an RMP™, purchase WTFix Straps™ for weaving.

MOLLE CLIPS

For mounting gear without integral straps or gear with loose MOLLE webbing onto an RMP™, use MOLLE clips.

HOOK & LOOP

For mounting hook backed pouches, morale patches or accessories onto an RMP™, purchase our Adhesive Backed - 3/4” Width Low Profile Loop.

    To adhere adhesive backed loop to an RMP™ :
  • Clean the RMP™ surface with an alcohol wipe and let completely dry.
  • Remove backing from the adhesive backed loop and press firmly into place on the RMP™.
  • Press further with a rolling pin or place heavy weight onto the newly loop faced RMP™ to compress and ensure full contact.

  • PRO TIP
  • For stronger adhesion, apply 3M™ Primer 94 - Ampule to the RMP™ surface before adhering the adhesive into place.
  • For stronger adhesion, apply heat from a hair dryer to warm up the surface and the adhesive, enabling the adhesive to liquefy enough to seep into the surface for a better bond.

PARACORD

For mounting gear with a paracord or shockcord onto an RMP™, weave cord through the 0.25" perimeter holes of the RMP™.

RMP™ FASTENING

HARD MOUNT SCREWS - UTILITY CASE LID

For fastening an RMP™ to a utility case, purchase our RMP Fastening Kit™ - Pelican Case Screws.
  • Align the RMP™ fastening holes with the utility case's mounting points.
  • If the mounting points are not pefecty aligned, use a standard 0.125" drill bit to create new fastening holes in the RMP™.
  • Use screws to fasten top and bottom center holes first.

HARD MOUNT SCREWS - SAFE DOOR


For fastening an RMP™ to a safe door, purchase our RMP Fastening Kit™ - Self Drilling Screws + Nylon Spacers.
  • Insert the self driling screws through the preferred perimeter holes of the RMP™.
  • Next, insert the self drilling screws through the nylon spacers.
  • Fasten the self drilling screws into the preferred location of the safe door. If preferred, a pilot hole may be drilled into safe door in advance.

HARD MOUNT SCREWS - DRYWALL


For fastening an RMP™ to a solid surface, purchase our RMP Fastening Kit™ - Self Drilling Drywall Anchors + Screws + Nylon Spacers.
  • Hold the RMP™ on the drywall and mark the mounting points through the preferred perimeter holes of the RMP™.
  • Remove the RMP™ and screw the self drilling drywall anchors in on each marked mounting point. Each drywall anchor is rated to hold 50lbs.
  • Insert the screws through the RMP™ in the prefered perimeter holes.
  • Next, insert the screws through the nylon spacers.
  • Fasten the screws into the self drilling drywall anchor.

3M™ DUAL LOCK™


For fastening an RMP™ using adhesive backed fasteners to a vehicle panel, utility case lid, safe door or metal, plastic and glass surfaces, purchase our Adhesive Backed - 3M™ Dual Lock™ Fastener Kit.

To adhere 3M™ Dual Lock™ to an RMP™ :

  • Clean RMP™ surface with an alcohol wipe and let completely dry.
  • Apply included 3M™ Primer 94 to the RMP™ surface that the 3M™ Dual Lock™ will be adhered.
  • Remove backing from the 3M™ Dual Lock™ strip and press firmly into place on the RMP™.
  • Press further with a rolling pin or place heavy weight onto the newly 3M™ Dual Lock™ backed RMP™ to compress and ensure full contact.
To adhere 3M™ Dual Lock™ to a solid surface:
  • Clean the solid surface with an alcohol wipe and let completely dry.
  • After adhering the 3M™ Dual Lock™ onto the RMP™, line up the corresponding 3M™ Dual Lock™ strip and secure in place.
  • Remove backing from the 3M™ Dual Lock™ while still secured to the RMP™.
  • Line up the RMP™ on the solid surface you desire to attach to your RMP™ and press firmly in place.
  • Remove the 3M™ Dual Lock™ backed RMP™ carefully to avoid lifting the 3M™ Dual Lock™ that is adhered to your solid surface.
  • Press further with a rolling pin or place heavy weight onto your newly 3M™ Dual Lock™ lined solid surface to compress and ensure full contact.
  • PRO TIP
  • For stronger adhesion, apply heat from a hair dryer to warm up the surface and the adhesive, enabling the adhesive to liquefy enough to seep into the surface for a better bond.
  • For easier handling or application, it is recommended to cut the 3M™ Dual Lock™ into 1" squares or 1" x 2" strips.