*NOTICE 4/08/2025 THERE IS A CURRENT LEAD TIME OF APPROXIMATELY 1-2 WEEKS FOR THIS PRODUCT TO BE SHIPPED

8 X 6 RMP™ - CONSOLE + DOOR + DASH

For fastening an RMP™ to a solid surface, purchase our RMP Fastening Kit™ - Self Drilling Screws + Nylon Spacers.

• Insert the self drilling screws through the preferred perimeter holes of the RMP™.

• Next, insert the self drilling screws through the nylon spacers.

• Fasten the self drilling screws into the preferred location of the solid surface. If preferred, a pilot hole may be drilled into solid surface in advance.

For fastening an RMP™ using adhesive backed fasteners to a vehicle panel, utility case lid, safe door or metal, plastic and glass surfaces, purchase our Adhesive Backed - 3M™ Dual Lock™ Fastener Kit.

To adhere 3M™ Dual Lock™ to an RMP™:

• Clean RMP™ surface with an alcohol wipe and let completely dry.
• Apply included 3M™ Primer 94 to the RMP™ surface that the 3M™ Dual Lock™ will be adhered.
• Remove backing from the 3M™ Dual Lock™ strip and press firmly into place on the RMP™.
• Press further with a rolling pin or place heavy weight onto the newly 3M™ Dual Lock™ backed RMP™ to compress and ensure full contact.

To adhere 3M™ Dual Lock™ to a solid surface:

• Clean the solid surface with an alcohol wipe and let completely dry.
• After adhering the 3M™ Dual Lock™ onto the RMP™, line up the corresponding 3M™ Dual Lock™ strip and secure in place.
• Remove backing from the 3M™ Dual Lock™ while still secured to the RMP™.
• Line up the RMP™ on the solid surface you desire to attach to your RMP™ and press firmly in place.
• Remove the 3M™ Dual Lock™ backed RMP™ carefully to avoid lifting the 3M™ Dual Lock™ that is adhered to your solid surface.
• Press further with a rolling pin or place heavy weight onto your newly 3M™ Dual Lock™ lined solid surface to compress and ensure full contact.

PRO TIP

• For stronger adhesion, apply heat from a hair dryer to warm up the surface and the adhesive, enabling the adhesive to liquefy enough to seep into the surface for a better bond.
• For easier handling or application, it is recommended to cut the 3M™ Dual Lock™ into 1" squares or 1" x 2" strips.

Package Contents:

Compatibility:

Specifications: