Tactical Seat Back Organizer | MOLLE Seat Back | Truck Gear
FREE SHIPPING ON ORDERS OVER $250 WITHIN CONTIGUOUS USA
HOME / VEHICLE FIT GUIDE/ SHOP SEAT BACK RMP™

SOLD OUT

RMP SERIES™

PSA: ANY ORDERS WITH A SIZE 15.25 X 25 PANEL CURRENTLY HAVE A LEAD TIME AND WILL SHIP OUT THE WEEK OF FEBRUARY 5TH.

The RMP Series [Rigid MOLLE Panel]™ provides a vertical organizational platform for quick and easy access in conquering your gear. With universal MOLLE compatibility, your RMP™ can be quickly redesigned to enable optimal customization for any task. Made in America, each RMP™ is made with a focus on quality craftsmanship and high endurance materials.

GMT GUARANTEE™
We will repair or replace any defective GMT™ product at no cost to you. Does not apply to third party products.

FAST SHIPPING
All products are in stock and ship next business day unless otherwise noted in product description.

EASY RETURNS
If product is not what you need, return within 30 days for a refund of purchase price. Shipping costs not refundable.

PACKAGE CONTENTS

  • QTY 1 - 15.25 X 25 RMP™
  • QTY 1 - Buckle Loop-Around + D-Ring RMP Strap™ Black [Headrest]
  • QTY 1 - Buckle Loop-Around RMP Strap™ Black [Seat Bottom]

COMPATIBILITY

VERIFIED SEAT BACK FIT
  • Driver/passenger seat back of a full size vehicle
  • Passenger front seat of a full size vehicle (measure to confirm height and width)
  • Any vehicle seat with seat back dimensions equal to or greater than 15.25" wide X 25" tall

SPECIFICATIONS

WIDTH 15.25" | 387.35mm

HEIGHT 25" | 635mm

THICKNESS 0.188" | 4.77mm

WEIGHT 34.5 ounces | 978.06 grams

MATERIAL Injection Molded Glass Filled Nylon

BRAND Grey Man Tactical™

SKU BLACK: 000312
TAN: 000528

UPC BLACK: 0850012379089
TAN: N/A

RMP™ ADVANTAGE

MOLLE PANEL FEATURES RIGID CLOTH
MOLD + MILDEW RESISTANT ✔ ✘
FIRE RESISTANT ✔ ✘
RUGGED DURABILITY ✔ ✘
LOAD-BEARING ✔ ✘
SAG RESISTANT ✔ ✘
HARD MOUNTING ABILITY ✔ ✘
PERIMETER HOLES FOR HARD + SOFT FASTENING ✔ ✘
PERIMETER SLOTS FOR CUSTOMIZING STRAP FASTENING ✔ ✘
AMERICAN MADE CRAFTSMANSHIP ✔ ✘

RMP™ FEATURES

►
Patented RMP [Rigid MOLLE Panel]™ grid design

►
Organizational platform for critical gear

►
Consistent positioning of critical gear enables quick access

►
Universal MOLLE compatibility

►
Weather resistant, non-corrosive build

►
Load-bearing, sag resistant construction

►
Durable high performance Polymer build
►
RMP Backer Plates Series™ enables seamless hard mounting of gear

►
40+ RMP™ models engineered to equip your vehicle, backpack, case + safe

►
Standardized sizing fits all applications

►
RMP™ can be quickly reorganized or interchanged for next task

►
1" slots for RMP Carry & Pull Handle™ and fastening

►
0.25" perimeter holes for paracord and screw fastening

►
Hand-finished, American made craftsmanship

GEAR MOUNTING

RAPTOR™ MOUNTS & BRACKETS

  • Purchase the Raptor Mount™ or Raptor Bracket™ with RMP Backer Plates™.
  • Place the RMP Backer Plates™ in the preferred location behind the RMP™.
  • From the frontside of the RMP™, insert the screws through the Raptor™ gear and fasten into the RMP Backer Plates™.

RAPTOR™ RAIL

  • Purchase the Locking Rifle Rack Kit - Raptor Rail Buffer Tube™ + LE Shield or Locking Rifle Rack Kit - Raptor Rail Picatinny™ + LE Shield.
  • Place the included RMP Backer Plates™ in the preferred location behind the RMP™.
  • From the backside of the RMP™, insert the screws through the RMP Backer Plates™ and fasten into the Raptor Rail™.

SC-6

  • Purchase the Locking Rifle Mount - SC-6.
  • Place the RMP Backer Plates™ in the preferred vertical or horizontal orientation behind the RMP™.
  • From the backside of the RMP™, insert the screws through the RMP Backer Plates™ and fasten into the SC-6 Mount.

RUBBER CLAMPS

  • Purchase a Rubber Clamp with RMP Backer Plates™.
  • Place the included RMP Backer Plates™ in the preferred location behind the RMP™.
  • From the frontside of the RMP™, insert the screws through the Rubber Clamp and fasten into the RMP Backer Plates™.

RMP BUTTSTOCK CUP™

  • Purchase our RMP™ Buttstock Cup Kit.
  • Place the RMP Backer Plates™ in the preferred vertical or horizontal orientation behind the RMP™.
  • From the backside of the RMP™, insert the screws through the RMP Backer Plates™ and fasten into the L-Bracket.
  • Align the center hole of the Buttstock Cup with the center hole of the L-Bracket and fasten with a screw.
  • Rotate the Buttstock Cup to the preferred position on the L-Bracket and fasten with the screws.

RMP MUZZLE CUP™


  • Purchase our RMP™ Muzzle Cup Kit.
  • Place the RMP Backer Plates™ in the preferred vertical or horizontal orientation behind the RMP™.
  • From the backside of the RMP™, insert the screws through the RMP Backer Plates™ and fasten into the L-Bracket.
  • Align the center hole of the Muzzle Cup with the desired hole of the L-Bracket and fasten with a screw.

HOLSTER INTEGRATION

  • Purchase a Holster Integration Kit.
  • Place the included RMP Backer Plates™ in the preferred location behind the RMP™.
  • From the frontside of the RMP™, insert the screws through the female adaptor and fasten into the RMP Backer Plates™.
  • Insert the screws through the male adaptor and fasten onto the holster.

    • PRO TIP
    Mount additional female adaptors onto a secondary Vehicle RMP™, Case RMP™, Plate Carrier or Belt Loop for easy transfer of one holster to multiple locations.

MOLLE STRAPS

For mounting gear with integral straps onto an RMP™, weave straps through the RMP™ grid.
For mounting gear without integral straps or gear with tight MOLLE webbing to an RMP™, purchase WTFix Straps™ for weaving.

MOLLE CLIPS

For mounting gear without integral straps or gear with loose MOLLE webbing onto an RMP™, use MOLLE clips.

HOOK & LOOP

For mounting hook backed pouches, morale patches or accessories onto an RMP™, purchase our Adhesive Backed - 3/4” Width Low Profile Loop.

    To adhere adhesive backed loop to an RMP™ :
  • Clean the RMP™ surface with an alcohol wipe and let completely dry.
  • Remove backing from the adhesive backed loop and press firmly into place on the RMP™.
  • Press further with a rolling pin or place heavy weight onto the newly loop faced RMP™ to compress and ensure full contact.

    • PRO TIP
  • For stronger adhesion, apply 3M™ Primer 94 - Ampule to the RMP™ surface before adhering the adhesive into place.
  • For stronger adhesion, apply heat from a hair dryer to warm up the surface and the adhesive, enabling the adhesive to liquefy enough to seep into the surface for a better bond.

PARACORD

For mounting gear with a paracord or shockcord onto an RMP™, weave cord through the 0.25" perimeter holes of the RMP™.

RMP™ FASTENING

PUSH BUTTON RMP STRAPS™

For fastening an RMP™ to vehicle seats with removable headrests, purchase our Push Button D-Ring + Push Button Loop-Around RMP Straps™ [Headrest Post & Seat Bottom].
  • For a 15.25 X 25 RMP™, insert push button base through the large top and bottom side fastening holes of the RMP™ and begin tightening push button nuts.
  • For all other RMP™ sizes, use a 9/16" spade bit to enlarge pre-existing mounting points. Insert push button base through the large top and bottom side fastening holes of the RMP™ and begin tightening push button nuts.
  • Hold push button nuts with a 3/4” wrench or crescent wrench and insert 1/4” Allen key wrench inside push button base to fully tighten.
  • Remove seat headrest, insert headrest posts through D-rings and reinsert headrest to seat.
  • Wrap seat bottom Push Button Loop-Around RMP Strap™ around seat bottom.
  • Insert push button swivels into push button bases on the RMP™.
  • Tighten RMP Straps™ and fold loose ends under Elastic Keepers.
    • PRO TIP Apply a drop of Loctite 242 to Push Button base bolt for long-term retention.

For fastening an RMP™ to vehicle seats without removable headrests, purchase two of our Push Button Loop-Around RMP Strap™ [Seat Bottom].
  • Insert push button base through the large top and bottom side fastening holes of the RMP™ and begin tightening push button nuts.
  • Hold push button nuts with a 3/4” wrench or crescent wrench and insert 1/4” Allen key wrench inside push button base to fully tighten.
  • Wrap Push Button Loop-Around RMP Straps™ around seat headrest and seat bottom.
  • Insert push button swivels into push button bases on the RMP™.
  • Tighten RMP Straps™ and fold loose ends under Elastic Keepers.
    • PRO TIP Apply a drop of Loctite 242 to Push Button base bolt for long-term retention.

BUCKLE RMP STRAPS™

For fastening an RMP™ to vehicle seats with removable headrests, purchase our Buckle D-Ring RMP Straps™ [Headrest Post] and Buckle Loop-Around RMP Strap™ Black [Seat Bottom].
  • Thread each headrest post Buckle D-Ring RMP Strap™ through the front of the top 1” slots on the RMP™.
  • Thread straps through back of buckles, loop straps around buckle bars and thread straps down through bottom of buckles.
  • Remove seat headrest, insert headrest posts through D-rings and reinsert headrest to seat.
  • Thread the seat bottom Buckle Loop-Around RMP Strap™ through the front of the bottom side 1” slots on the RMP™.
  • Thread strap through back of buckles, loop strap around buckle bars and thread strap down through bottom of buckles.
  • Wrap Buckle Loop-Around RMP Strap™ around seat bottom.
  • Fasten buckles on RMP™ to buckles on seat.
  • Tighten RMP Straps™ and fold loose strap ends under Elastic Keepers.

For fastening an RMP™ to vehicle seats without removable headrests, purchase our Buckle Loop-Around RMP Strap™ Black [Headrest] and Buckle Loop-Around RMP Strap™ Black [Seat Bottom].
  • Thread the headrest Buckle Loop-Around RMP Strap™ through the front of the top 1” slots on the RMP™.
  • Thread strap through back of buckles, loop strap around buckle bars and thread strap down through bottom of buckles.
  • Wrap Buckle Loop-Around RMP Strap™ around seat headrest.
  • Thread the seat bottom Buckle Loop-Around RMP Strap™ through the front of the bottom side 1” slots on the RMP™.
  • Thread strap through back of buckles, loop strap around buckle bars and thread strap down through bottom of buckles.
  • Wrap Buckle Loop-Around RMP Strap™ around seat bottom.
  • Fasten buckles on RMP™ to buckles on seat.
  • Tighten RMP Straps™ and fold loose strap ends under Elastic Keepers.

HARD MOUNT SCREWS


For fastening an RMP™ to a solid surface, purchase our RMP Fastening Kit™ - Self Drilling Screws + Nylon Spacers.
  • Insert the self drilling screws through the preferred perimeter holes of the RMP™.
  • Next, insert the self drilling screws through the nylon spacers.
  • Fasten the self drilling screws into the preferred location of the solid surface. If preferred, a pilot hole may be drilled into solid surface in advance.

3M™ DUAL LOCK™


For fastening an RMP™ using adhesive backed fasteners to a vehicle panel, utility case lid, safe door or metal, plastic and glass surfaces, purchase our Adhesive Backed - 3M™ Dual Lock™ Fastener Kit.

To adhere 3M™ Dual Lock™ to an RMP™ :

  • Clean RMP™ surface with an alcohol wipe and let completely dry.
  • Apply included 3M™ Primer 94 to the RMP™ surface that the 3M™ Dual Lock™ will be adhered.
  • Remove backing from the 3M™ Dual Lock™ strip and press firmly into place on the RMP™.
  • Press further with a rolling pin or place heavy weight onto the newly 3M™ Dual Lock™ backed RMP™ to compress and ensure full contact.
To adhere 3M™ Dual Lock™ to a solid surface:
  • Clean the solid surface with an alcohol wipe and let completely dry.
  • After adhering the 3M™ Dual Lock™ onto the RMP™, line up the corresponding 3M™ Dual Lock™ strip and secure in place.
  • Remove backing from the 3M™ Dual Lock™ while still secured to the RMP™.
  • Line up the RMP™ on the solid surface you desire to attach to your RMP™ and press firmly in place.
  • Remove the 3M™ Dual Lock™ backed RMP™ carefully to avoid lifting the 3M™ Dual Lock™ that is adhered to your solid surface.
  • Press further with a rolling pin or place heavy weight onto your newly 3M™ Dual Lock™ lined solid surface to compress and ensure full contact.
    • PRO TIP
  • For stronger adhesion, apply heat from a hair dryer to warm up the surface and the adhesive, enabling the adhesive to liquefy enough to seep into the surface for a better bond.
  • For easier handling or application, it is recommended to cut the 3M™ Dual Lock™ into 1" squares or 1" x 2" strips.

PARACORD

For fastening an RMP™ with a paracord or shockcord to your vehicle seat, backpack or for creating handles, weave cord through the 0.25" perimeter holes of the RMP™.

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods