• Free Shipping in USA On orders over $250 Use code FREESHIP$250
21.25 X 15 RMP™
21.25 X 15 RMP™
21.25 X 15 RMP™
21.25 X 15 RMP™

21.25 X 15 RMP™

16 reviews   |  

Regular price $75.00


RMP Pelican 1600 Lid Organizer and Horizontal Cargo Area Gear Panel


- Pre-drilled holes to line up with mounting points in lid of Pelican Case

- Rigid Panel prevents sagging

- Attach MOLLE style pouches to organize your gear

- Customize with Adhesive Backed Loop to accept Velcro Hook Pouches

- Use GMT backer plates to hard mount accessories

- 0.25" holes on edge for mounting with screws

- 1" slots for attaching 1" Webbing Mounting Straps and Handles

The RMP was designed for modular organization on a rigid platform which can be secured in the lid, base, or walls of hard side cases among other applications. Quick access to your gear is enhanced by the consistent positioning and customizable layout. Inserted into any hard side case or vehicle, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes.


Product Specifications


Width: 21.25" (533.4mm) 

Height: 15" (381mm) 

Thickness: 0.188" (4.77mm)

Material: High Strength Polyethylene 

Panel Weight: 21 ounces (595.34 grams)

 


Pelican and Hard Case Compatibility


- The 21.25in x 15in RMP is made to specifically fit the Pelican 1600 lid.

Mounting RMP to Pelican Case Lid

Molded Screw Mounting Points:

- Line up the pre-drilled holes on the panel with the molded mounting point and fasten with the "#8 x 1/2" Pelican Case Mounting Screws".

- It is recommended to line up the top center hole and fasten with a screw there first.

- If there is a an issue with the holes not lining up perfectly a standard drill with a 0.125" or similar sized drill bit to create new mounting hole

Slick Lids with No Molded Screw Mounting Points: 

Many models of Pelican Case and other Hard Side protective cases do not have any molded mounting points. In this case we avoid using screws as it may pierce through the exterior of the case causing damage to the air/water tight nature of the case. Instead we specify using 3M Dual Lock adhesive backed tape (available on our site). In order to adhere to the very slick plastic of the hard side case as well as the RMP, we specify using the included 3M Primer 94 to prime all surfaces where 3M Dual Lock will adhere.

- Wipe surface to be adhered to (RMP and corresponding surface on Hard Case Lid) with an Alcohol Cleaning Wipe. Allow to completely dry.

- Apply 3M Primer 94 to RMP and Hard Case Lid where 3M Dual Lock will be adhered. Allow to tack up per directions supplied with 3M Primer 94.

- Peel and Stick 3M Dual Lock into place, use firm pressure to ensure 100% contact is achieved.

- Allow to dry over night and then snap RMP panel onto Lid of Case.

Vehicle Compatibility

- Compact to Full Size Cars (Trunk lid or rear seat back which is in trunk space)

- Compact to Full Size SUVs (Fold up Rear Seats, Cargo Area Walls) 

- Compact to Full Size Trucks (Fold up Rear Seats, Cargo Area Walls) 

   

- Helicopters and Aircraft (Cargo Area Walls)

- Boats (Cargo Area Walls)

Securing RMP to Vehicle Seat

For Rear Fold Up Seats

- Loop two or more longer Bottom straps around the base of the seat and secure to the RMP on both sides of panel. Can be mounted under flip up seat base or on flip down rear row seat backs in the same fashion.

- Tighten to desired fit.

- Optionally lock the RMP panel by passing a cable lock through one of the holes or rectangular punch outs on the RMP panel and then loop through the metal base of the vehicle seat to lock it to vehicle.

For Seats with Exposed Metal Frames (MRAP and Similar)

 - If holes on outside of panel line up with metal frame, simply mark where screws/bolts will be on the Metal Seat Frame, drill and tap to accept screw/bolt of your choice.

- If existing holes on panel do not line up, mark and drill new holes in panel to pass mounting hardware through.

- Recommended to Mount panel using Nylon Spacers (5/16" x 0.25"ID available through GMT) to provide standoff.

Mounting RMP to Safe Door

Mounting to Internal Wood Panel of Safe Door:

- Line up RMP in desired location.

- Using "Hardware Mounting Kit - Self Drilling Screws with Nylon Spacers" available through GMT slide the Self Drilling Screw through the outside edge holes on the RMP, slide a spacer onto it, and then drill/screw into the wood paneling of the safe door.

- A pilot hole may be drilled if desired prior to applying screws/spacers.

Attaching Quick Fist Gear Clamps

- Set Backer Plate into punch out from back of panel at desired location.

- Accessories with multiple backer plates may need the backer plates to be oriented properly for either vertical or horizontal mounting

- Pass screws through rubber Quick Fist Clamp and line up with drilled/tapped hole in backer plate, secure by screwing into hole.

- Multiple sizes of Quick Fist Rubber Clamps are available to secure different sized tools.

- The same procedure can be used to attach any accessory that requires backer plates

 
 

Attaching MOLLE Pouches


Standard MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel

Maxpedition MOLLE Pouch how to attach to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE pouch attachment to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel

Duraflex Speed Sticks MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Duraflex Speed Sticks MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel

Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel

Upgrading to accept Velcro Hook/Loop Pouches

To upgrade any RMP to accept Hook backed pouches, morale patches, or accessories follow the below steps:

To adhere the Adhesive backed Velcro Loop tape to your RMP panel:

- Purchase "Low Profile Loop - Adhesive Backed - 1" Width" from GMT. 

- Ensure the panel is cleaned with an alcohol wipe and completely dry.

- Peel the backing off the adhesive backed velcro tape and place the loop section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

- Apply heat from a hair dryer to warm up the panel and the velcro, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

- Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

Customer Reviews
5 Based on 16 Reviews
Write a Review Ask a Question
  • Reviews
  • Questions

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
M
09/10/2019
M.West
Keeps lock Box

I wanted to share a solution that many Jeep owners could perhaps use. If you’re familiar with jeeps, there is little to no room for much of anything, more especially in a 2-door soft top. My solution was to install a Tuffy secure cargo enclosure in the rear of the Jeep. The Tuffy is secured by locking the rear gate. On the underside of the Tuffy lid I mounted one of your rigid MOLLE panels. I also used 1/4 nylon spacers between the MOLLE and lid. This solved a couple of issues, secured weapon, using underside of the Tuffy lid, also, I can exit my Jeep, make my way to the rear, ready access my weapon, and also have a better defensive location, having the swing out gate offering more cover and hopefully having the rest of the Jeep between me and any threat. -M. West Texas

M.West verified customer review of 21.25 X 15 RMPM.West verified customer review of 21.25 X 15 RMP
M
09/10/2019
M.West
Jeep lock Box

I wanted to share a solution that many Jeep owners could perhaps use. If you’re familiar with jeeps, there is little to no room for much of anything, more especially in a 2-door soft top. My solution was to install a Tuffy secure cargo enclosure in the rear of the Jeep. The Tuffy is secured by locking the rear gate. On the underside of the Tuffy lid I mounted one of your rigid MOLLE panels. I also used 1/4 nylon spacers between the MOLLE and lid. This solved a couple of issues, secured weapon, using underside of the Tuffy lid, also, I can exit my Jeep, make my way to the rear, ready access my weapon, and also have a better defensive location, having the swing out gate offering more cover and hopefully having the rest of the Jeep between me and any threat. -M. West Texas

M.West verified customer review of 21.25 X 15 RMPM.West verified customer review of 21.25 X 15 RMP
A
09/08/2019
Anonymous
Love it

Recently brought item from your company. Loved the products. Here are a couple pictures of the final product.

Anonymous verified customer review of 21.25 X 15 RMP
A
09/05/2019
Anonymous
Great

Great stuff, but I have to say, you should make the buckles a little more non-slip or change how they adjust, kind of a pain in the ass to install, but, once you have it figured it out it seems to stay in place pretty well.

Anonymous verified customer review of 21.25 X 15 RMP
JA
09/05/2019
JM A.
Excellent

Greyman tactical has been one of the best if not the best companies I have ever done business with. Their items ship fast as well as customer service is something that I feel that they pride themselves on as every question has been answered without hesitation and they have been very helpful with what panels would work best for my application. Every item I have received has surpassed my expectations. These panels have officially changed the game for interior vehicle storage.

JM Auto Styling  verified customer review of 21.25 X 15 RMP