15.25 X 11 RMP [Rigid MOLLE Panel] by Grey Man Tactical
  • NEXT DAY SHIPPING | FREE SHIPPING on orders over $250 with code FREESHIP$250
15.25 X 11 RMP™
15.25 X 11 RMP™
15.25 X 11 RMP™
15.25 X 11 RMP™
15.25 X 11 RMP™

15.25 X 11 RMP™

9 reviews   |  

Regular price $55.00


 


RMP Tactical Backpack Insert 


- Rigid Panel stays upright in backpack

- Attach MOLLE style pouches to organize your gear

- Customize with Adhesive Backed Loop to accept Velcro Hook Pouches

- Use GMT backer plates to hard mount a variety of accessories

- Universal fit, check compatibility chart for sizing

- 0.25" holes on edge for mounting with screws

- 1" slots for attaching handles or mounting with 1" webbing 

    The RMP was designed for modular organization on a rigid platform that allows vertical organization within a backpack. Quick access to your gear is enhanced by the consistent positioning and customizable layout. When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes.


    Product Specifications


    Width: 15.25" (387.35mm) 

    Height: 11" (279.40mm)

    Thickness: 0.188" (4.77mm)

    Material: High Strength Polyethylene 

    Weight: 11 ounces (311.85 grams)



    Backpack Compatibility


    The 15.25in x 11in RMP Briefcase Insert fits:

    - Briefcase (Standard) or Messenger Bag
    - Any case or bag with interior dimensions equal to or greater than 15.25in wide x 11in tall

     

    Securing RMP inside Backpack

    For Backpacks with Internal Webbing:

    Some backpacks have MOLLE webbing sewn inside. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods.

    For backpacks with Internal Velcro Loop:

    - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. 

    - Ensure the panel is cleaned with an alcohol wipe and completely dry.

    - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

    - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

    - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

      For any backpack without internal MOLLE webbing:

      Hydration Bladder Loop

      - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Use Velcro one wrap or Grimloc.

      Grommet / Chicago

      - Punch a hole in the fabric and secure a grommet to prevent ripping. Use a chicago screw to secure the panel to the grommet.

      Adhesive backed Velcro

      To adhere the Adhesive backed Velcro Hook tape to your RMP panel:

      - Ensure the panel is cleaned with an alcohol wipe and completely dry.

      - Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.

      - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.

      - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        To adhere the Loop side adhesive backed velcro to the backpack:

        - Once Velcro Hook is adhered to the panel, stick the velcro loop onto that strip on the panel as well so it is perfectly lined up

        - Flip your backpack inside out so you get an unobstructed view of the interior back panel of the bag that the rigid molle panel will fit against

        - Peel the plastic off the adhesive backed velcro loop (leaving the velcro loop stuck in place on the RMP)

        - Line up the entire RMP where you want it in the backpack and stick it down in place. Press firmly to ensure Velcro Loop side has stuck to bag, and then peel the panel/velcro hook away from the bag, careful to leave the velcro loop in place inside the bag.

        - Press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. Apply heat from a hair dryer to warm up the bag and the velcro loop tape, enabling the adhesive to "run" or liquefy enough to seep into the bag fabric for a better bond.

         

        Attaching Holsters with Quick Detach Platforms


        Set Backer Plate into punch out from back of RMP panel at desired location.
        - Accessories with multiple backer plates may need the backer plates to be oriented properly for either vertical or horizontal mounting
        - Pass screws through Female Receiver Plate and into tapped hole of backer plate from the front side of the RMP panel, screw in to secure.
        - Screw the Male Plate onto the Holster.
        - If desired mount additional Female Receiver Plates onto a belt loop, MOLLE webbing of bag or vest elsewhere, separate RMP panel in a vehicle, storage case, safe door etc. Anywhere you mount additional Female Receiver Plates will allow you to quickly secure the piece of gear that has the Male Plate to that item. The same procedure can be used to attach any accessory that requires backer plates

         
         


        Attaching MOLLE Pouches


        Standard MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Tactical Tailor MALICE Clip MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel
        Maxpedition MOLLE Pouch how to attach to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE pouch attachment to Grey Man Tactical Rigid MOLLE Panel WTFix Straps MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel
        Duraflex Speed Sticks MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel Duraflex Speed Sticks MOLLE Pouch attachment to Grey Man Tactical Rigid MOLLE Panel Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel
        Blackhawk Speed Clips MOLLE Pouch Attachment to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel G-Code Softshell Scorpion Mag Pouch and RTI Wheel attachment with backer plates to Grey Man Tactical Rigid MOLLE Panel

         

        Upgrading to accept Velcro Hook/Loop Pouches


        To upgrade any RMP to accept Hook backed pouches, morale patches, or accessories follow the below steps:
        To adhere the Adhesive backed Velcro Loop tape to your RMP panel:
        - Purchase "Low Profile Loop - Adhesive Backed - 1" Width" from GMT. 
        - Ensure the panel is cleaned with an alcohol wipe and completely dry.
        - Peel the backing off the adhesive backed velcro tape and place the loop section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact.
        - Apply heat from a hair dryer to warm up the panel and the velcro, enabling the adhesive to "run" or liquefy enough to seep into the panel for a better bond.
        - Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place. This promotes higher adhesion to the panel.

        Customer Reviews
        5 Based on 9 Reviews
        Write a Review Ask a Question
        • Reviews
        • Questions

        Thank you for submitting a review!

        Your input is very much appreciated. Share it with your friends so they can enjoy it too!

        Filter Reviews:
        02/10/2020
        BS
        Bill S.
        United States United States

        Using A RMP Briefcase Messenger Bag Insert

        Recently I purchased a Briefcase Messenger Bag Insert for my 9 Line Messenger Bag-Drop Line. I use my bag to carry a lot of needed items in my law enforcement job. Using various bags and back packs through the years, I’ve always looked at any gear to make my job easier. The RMP BMG Insert certainly fits this bill. The Insert has allowed my bag to function better as a lot of the equipment that would just be floating around in the bottom is locked in place and able to be found quickly. One thing I like is that the Insert gives my bag just enough overall rigidity instead of total slouchy. It’s a preference of mine. After receiving my Insert, I dug through my many nylon pouches and settled on four. One is a small 5.11 pouch which holds small various items. Another is a tall Tactical Tailor pouch which contains a few tools that I use almost daily. I also have a Surefire flashlight attached in a unknown maker pouch. The last pouch is attached by a Velcro holder on the Insert. It contains a lighter and some store cards I don’t carry on me, but like to have with me. Probably the most important item that I have on my Insert is TQ, Combat Guaze, and Quickclot. I fashioned a piece of bungee cord myself to attach and it works perfect. I would highly recommend this Insert to anyone really looking to update their messenger bag or back pack for more overall organization of the items they carry. Wild Bill

        Bill S. verified customer review of 15.25 X 11 RMP™
        09/14/2019
        A
        Anonymous
        United States United States

        Love these panels!

        These panels are great. Have them mounted low behind front seats in the Jeep where some of my preparedness gear is permanently attached and stored! Organized and accessable now, love it.

        08/13/2019
        A
        anonymous

        Used in briefcase

        I just received my Rigid Molle Panel from you guys and attached are pics of my set up. A little background, got the bag for x-mas it is a Duluth Trading leather briefcase, nice bag however there was no provision for concealed carry or organizing my other gear. That when I came across you guys. Attached basically everything with Velcro Onewrap. If it looks backwards, probably because I am a lefty.

        anonymous verified customer review of 15.25 X 11 RMP™
        07/22/2019
        CR
        Craig R.
        United States United States

        MOLLE Wall plate

        no issues - product worked wonderful

        07/09/2019
        R
        Rob

        No limitations like other panels

        Thanks for making this product. I’ve tried other panels, but they have the following limitations: Non-standard slot sizes; every other row/column is offset by 1/2 slot width; flimsy combination of fabric and overly thin plastic. I wanted something that would hold my EDC gear in dedicated pouches, that would hold its position/shape in a messenger bag, and could be transferred easily from bag to bag. Your “Rigid MOLLE Panel” (RIP-M) works perfectly in all respects. I have a substantial collection of pouches -some with “unusual” MOLLE spacing, and even these have worked. I’ve attached some photos of my setup. I will certainly buy another panel, in a vertical orientation. You might consider offering a package of pouches, matched to the Panel.

        Rob verified customer review of 15.25 X 11 RMP™Rob verified customer review of 15.25 X 11 RMP™Rob verified customer review of 15.25 X 11 RMP™
        05/15/2019
        RS
        Rob S.
        United States

        Molle panel for overland vehicle

        I was super impressed with the ordering experience, the attention to detail in the packaging and materials and the sturdiness and quality of the actual panel upon receipt. Couldn’t be happier. Will be decking out the whole truck in it!

        Rob S. verified customer review of 15.25 X 11 RMP™Rob S. verified customer review of 15.25 X 11 RMP™
        01/07/2019
        RR
        Rob R.

        Perfect for Briefcase

        I just received my Rigid Molle Panel from you guys that I ordered for a bag that I got for x-mas. It is a Duluth Trading leather briefcase, nice bag however there was no provision for concealed carry or organizing my other gear. That when I came across you guys. Attached basically everything to the panel with Velcro Onewrap. If it looks backwards to anyone, be aware I am a lefty.

        08/21/2018
        DF
        David F.
        US

        Worked Perfect

        So I have been thinking about this for 2 years now and it finally came together. I built an AR pistol in 300 blackout with a removable barrel and it is small enough to fit into a laptop bag. With the panel it holds everything together perfect. These panels are legit, I would recommend them to everyone!!

        David Fellingham verified customer review of 15.25 X 11 RMP™David Fellingham verified customer review of 15.25 X 11 RMP™David Fellingham verified customer review of 15.25 X 11 RMP™
        04/27/2018
        DK
        David K.
        USA

        Love the products

        The small panel is mounted to the inside of a top case on the back of my motorcycle, it holds a radio, a couple flashlights, and my IFAK. Love the products, as soon as I can figure out a use for another one I'll be ordering it!

        David K verified customer review of 15.25 X 11 RMP™David K verified customer review of 15.25 X 11 RMP™